1) what is the name of the pliers given in the figure?
- Long nose plierUseful for Electrician, Wireman, Lineman,Auto Electrician,Electroplator, Electrical Rewinder,Lift Machine,All Electrical Sector, Polytechnic, Engineering, Electrical Supervisor, Technical Exam
Popular Posts
-
1 ) Electricals Safety. •┈┈••✦✿✦•♥️•✦✿✦••┈┈• 2) Electrical tools. •┈┈••✦✿✦•♥️•✦✿✦••┈┈• 3) Introduction ot electricity. •┈┈••✦✿✦•♥️•✦✿✦••┈...
-
1) Do not work on live circuits; if unavoidable,.... - Use rubber gloves rubber mats,etc 2) Which one of the use handle screw drivers when...
-
1) what is the name of the pliers given in the figure? - Long nose plier 2) What is the name of the pliers given the figure? - Combination ...
Saturday, October 31, 2020
Thursday, October 15, 2020
Electrical Safety
1) Do not work on live circuits; if unavoidable,....
- Use rubber gloves rubber mats,etc
2) Which one of the use handle screw drivers when working on electrical circuits?
- Wooden or PVC insulated
3) Use only correct capacity fuses in the circuit.
- If the capacity is less it will blow out when other load is connected
4) Replace or remove fuses only after switching...
- Off the circuit switches
5) Use extension cords with lamp guards to protect lamps..
- Against breakage and avoid
6) Which correct accessories are use like sockets , plugs and switches and appliances..
- If they are in good condition and be sure they have the mark of BIS (ISI)
7) Never extend Electrical Circuits by..
- Using temporary wiring.
8) Which equipments are use while working on poles and high rise points?
- Safety belts.
9) Run Cables or cords through wooden partitions or floor after inserting...
- Insulating porcelain tubes.
10) Connections in the Electrical apparatus should be tight.
- Loosely connected Cables will heat and end in fire hazard.
- Loosely connected switches will heat and end in fire hazard.
- Loosely connected MCB will heat and end in fire losses.
11) Use always earth connection for all Electrical appliances along with...
- Any pin sockets and plugs.
12) While working on dead circuits remove the fuse grips; keep them under...
- Safe custody and also display Men on line board on the switchboard
13) Do not connect earthing to the ....
- Water pipe lines
14) Do not use water on ....
- Electrical equipment.
15) Standardization can be defined as the process of formulating and applying...
- Rules for an orderly approach to specific activity
16) For various goods through their booklets, the standard is specified by.....
- Bureau of Indian standard BIS (ISI)
17) There are a number of organization for standardization throughout....
- The world in different countries.
18) Which country is operated GOST the organization for standardization?
- Russia
19) Advantages of BIS (ISI) certification marks scheme to manufacturers.
- Streamlining of production processes and introduction of quality control system.
- Indipendent audit of quality control system by BIS.
- Reaping of production economics accruing from standardization.
20) However, if you are not sure about the area of control of sub- main switches,.....
- It is always better to switch off, the main switch itself.
21) Educate the inmates of the house how to...
- Switch off the circuit in case of any emery.
22) Generally accidents do not happen; they are caused....
- Most accidents are avoidable.
23) Safety in a workshop can be broadly classified...
- General safety.
- Person safety.
- Machine safety.
24) Keep the floor and gangways clean and clear.....
- General safety.
25) Move with care in teh workshop, do not run.
- General safety.
26) Don't touch or handle any equipment machine unless authorised to do so.
- General safety.
27) Don't leave the machine which is in motion.
- General safety.
28) Keep the overall buttons fastned.
- Personal safety.
29) Kinds of road signs.
- Mandatory,
- Cautionary and,
- Informatory.
30) Never start a machine unless .....
- All the safety gards are in position.
Index
•┈┈••✦✿✦•♥️•✦✿✦••┈┈•
2) Electrical tools.
•┈┈••✦✿✦•♥️•✦✿✦••┈┈•
3) Introduction ot electricity.
•┈┈••✦✿✦•♥️•✦✿✦••┈┈•
4) Electrical Circuit.
•┈┈••✦✿✦•♥️•✦✿✦••┈┈•
5) Conduct, Insulators.
•┈┈••✦✿✦•♥️•✦✿✦••┈┈•
6) Electrical Accessories.
•┈┈••✦✿✦•♥️•✦✿✦••┈┈•
7) Battery.
•┈┈••✦✿✦•♥️•✦✿✦••┈┈•
8) Magnet and Electromagnet.
•┈┈••✦✿✦•♥️•✦✿✦••┈┈•
9) Capacitor.
•┈┈••✦✿✦•♥️•✦✿✦••┈┈•
10) AC fundamental.
•┈┈••✦✿✦•♥️•✦✿✦••┈┈•
11) Earthing.
•┈┈••✦✿✦•♥️•✦✿✦••┈┈•
12) Electronics.
•┈┈••✦✿✦•♥️•✦✿✦••┈┈•
13) Domestic and Industrial Wiring.
•┈┈••✦✿✦•♥️•✦✿✦••┈┈•
14) DC generator.
•┈┈••✦✿✦•♥️•✦✿✦••┈┈•
15) Dc motor.
•┈┈••✦✿✦•♥️•✦✿✦••┈┈•
16) Transformer.
•┈┈••✦✿✦•♥️•✦✿✦••┈┈•
17) Measuring Instruments.
•┈┈••✦✿✦•♥️•✦✿✦••┈┈•
18) Three Phese Induction Motor.
•┈┈••✦✿✦•♥️•✦✿✦••┈┈•
19) Synchronous Motor.
•┈┈••✦✿✦•♥️•✦✿✦••┈┈•
20) Single Phase Motor.
•┈┈••✦✿✦•♥️•✦✿✦••┈┈•
21) Alternator.
•┈┈••✦✿✦•♥️•✦✿✦••┈┈•
22) Winding.
•┈┈••✦✿✦•♥️•✦✿✦••┈┈•
23) Illumination.
•┈┈••✦✿✦•♥️•✦✿✦••┈┈•
24) Control Panel Wiring.
•┈┈••✦✿✦•♥️•✦✿✦••┈┈•
25) Domastic Appliances.
•┈┈••✦✿✦•♥️•✦✿✦••┈┈•
26) Power Genaretor.
•┈┈••✦✿✦•♥️•✦✿✦••┈┈•
27) Power Transmission and Distribution.
•┈┈••✦✿✦•♥️•✦✿✦••┈┈•
28) Electrical Drivers.
•┈┈••✦✿✦•♥️•✦✿✦••┈┈•
29) Basic Computer.
•┈┈••✦✿✦•♥️•✦✿✦••┈┈•
Index
1 ) Electricals Safety. •┈┈••✦✿✦•♥️•✦✿✦••┈┈• 2) Electrical tools. •┈┈••✦✿✦•♥️•✦✿✦••┈┈• 3) Introduction ot electricity. •┈┈••✦✿✦•♥️•✦✿✦••┈...
-
1 ) Electricals Safety. •┈┈••✦✿✦•♥️•✦✿✦••┈┈• 2) Electrical tools. •┈┈••✦✿✦•♥️•✦✿✦••┈┈• 3) Introduction ot electricity. •┈┈••✦✿✦•♥️•✦✿✦••┈...
-
1) Do not work on live circuits; if unavoidable,.... - Use rubber gloves rubber mats,etc 2) Which one of the use handle screw drivers when...
-
1) what is the name of the pliers given in the figure? - Long nose plier 2) What is the name of the pliers given the figure? - Combination ...









