Popular Posts

Saturday, October 31, 2020

Electrical Tools

 1) what is the name of the pliers given in the figure?

- Long nose plier

2) What is the name of the pliers given the figure?
- Combination plier

3) What is the name of figure given below?
- Neion Tester
  Screwdrivr

4) What is the name of figure given below?
- Neion Tester

5) What is the name of figure given below?
- Electrician's knife

6? What is the name of the figure given below?
- Four-fold box wood rule 600 mm.
 
8) What is the name of figure given below?
- Try-square

9) What is the name of figure given below?
- Wooden rasp file

10) What is the name of figure given below?
- Bradawl square pointed (or poker)

11) What is the name of figure given below?

Thursday, October 15, 2020

Electrical Safety

 1) Do not work on live circuits; if unavoidable,....

- Use rubber gloves rubber mats,etc

2) Which one of the use handle screw drivers  when working on electrical circuits?

- Wooden or PVC insulated

3) Use only correct capacity fuses in the circuit.

- If the capacity is less it will blow out when other load is connected

4) Replace or remove fuses only after switching...

- Off the circuit switches

5) Use extension cords with lamp guards to protect lamps..

- Against breakage and avoid

6) Which correct accessories are use like sockets , plugs and switches and appliances..

- If they are in good condition and be sure they have the mark of BIS (ISI)

7) Never extend Electrical Circuits by..

- Using temporary wiring.

8) Which equipments are use while working on poles and high rise points?

- Safety belts.

9) Run Cables or cords through wooden partitions or floor after  inserting...

- Insulating porcelain tubes.

10) Connections in the Electrical apparatus should be tight.

- Loosely connected Cables will heat and end in fire hazard.

- Loosely connected switches will heat and end in fire hazard.

- Loosely connected MCB will heat and end in fire losses.

11) Use always earth connection for all Electrical appliances along with...

- Any pin sockets and plugs.

12) While working on dead circuits remove the fuse grips; keep them under...

- Safe custody and also display Men on line board on the switchboard 

13) Do not connect earthing to the ....

- Water pipe lines

14) Do not use water on ....

- Electrical equipment.

15) Standardization can be defined as the process of formulating and applying...

-  Rules for an orderly approach to specific activity

16) For various goods through their booklets, the standard is specified by.....

- Bureau of Indian standard BIS (ISI)

17) There are a number of organization for standardization throughout....

- The world in different countries.

18) Which country is operated GOST the organization for standardization?

- Russia

19) Advantages of BIS (ISI) certification marks scheme to manufacturers.

- Streamlining of production processes and introduction of quality control system.

- Indipendent audit of quality control system by BIS.

- Reaping of production economics accruing from standardization.

20) However, if you are not sure about the area of control of sub- main switches,.....

- It is always better to switch off, the main switch itself.

21) Educate the inmates of the house how to...

- Switch off the circuit in case of any emery.

22) Generally accidents do not happen; they are caused....

- Most accidents are avoidable.

23) Safety in a workshop can be broadly classified...

- General safety.

- Person safety.

- Machine safety.

24) Keep the floor and gangways clean and clear.....

- General safety.

25) Move with care in teh workshop, do not run.

- General safety.

26) Don't touch or handle any equipment machine unless authorised to do so.

- General safety.

27) Don't leave the machine which is in motion.

- General safety.

28) Keep the overall buttons fastned.

- Personal safety.

29) Kinds of road signs.

- Mandatory,

- Cautionary and,

- Informatory.

30) Never start a machine unless .....

- All the safety gards are in position.



Index

 1 ) Electricals Safety. 

•┈┈••✦✿✦•♥️•✦✿✦••┈┈•


2) Electrical tools.

•┈┈••✦✿✦•♥️•✦✿✦••┈┈•


3) Introduction ot electricity.

•┈┈••✦✿✦•♥️•✦✿✦••┈┈•


4) Electrical Circuit.

•┈┈••✦✿✦•♥️•✦✿✦••┈┈•


5) Conduct, Insulators.

•┈┈••✦✿✦•♥️•✦✿✦••┈┈•


6) Electrical Accessories.

•┈┈••✦✿✦•♥️•✦✿✦••┈┈•


7) Battery.

•┈┈••✦✿✦•♥️•✦✿✦••┈┈•


8) Magnet and Electromagnet.

•┈┈••✦✿✦•♥️•✦✿✦••┈┈•


9) Capacitor.

•┈┈••✦✿✦•♥️•✦✿✦••┈┈•


10) AC fundamental.

•┈┈••✦✿✦•♥️•✦✿✦••┈┈•


11) Earthing.

•┈┈••✦✿✦•♥️•✦✿✦••┈┈•


12) Electronics.

•┈┈••✦✿✦•♥️•✦✿✦••┈┈•


13) Domestic and Industrial Wiring.

•┈┈••✦✿✦•♥️•✦✿✦••┈┈•


14) DC generator.

•┈┈••✦✿✦•♥️•✦✿✦••┈┈•


15) Dc motor.

•┈┈••✦✿✦•♥️•✦✿✦••┈┈•


16) Transformer.

•┈┈••✦✿✦•♥️•✦✿✦••┈┈•


17) Measuring Instruments.

•┈┈••✦✿✦•♥️•✦✿✦••┈┈•


18) Three Phese Induction Motor.

•┈┈••✦✿✦•♥️•✦✿✦••┈┈•


19) Synchronous Motor.

•┈┈••✦✿✦•♥️•✦✿✦••┈┈•


20) Single Phase Motor.

•┈┈••✦✿✦•♥️•✦✿✦••┈┈•


21) Alternator.

•┈┈••✦✿✦•♥️•✦✿✦••┈┈•


22) Winding.

•┈┈••✦✿✦•♥️•✦✿✦••┈┈•


23) Illumination.

•┈┈••✦✿✦•♥️•✦✿✦••┈┈•


24) Control Panel Wiring.

•┈┈••✦✿✦•♥️•✦✿✦••┈┈•


25) Domastic Appliances.

•┈┈••✦✿✦•♥️•✦✿✦••┈┈•


26) Power Genaretor.

•┈┈••✦✿✦•♥️•✦✿✦••┈┈•


27) Power Transmission and Distribution.

•┈┈••✦✿✦•♥️•✦✿✦••┈┈•


28) Electrical Drivers.

•┈┈••✦✿✦•♥️•✦✿✦••┈┈•


29) Basic Computer.

•┈┈••✦✿✦•♥️•✦✿✦••┈┈•

Index

 1 ) Electricals Safety.   •┈┈••✦✿✦•♥️•✦✿✦••┈┈• 2) Electrical tools. •┈┈••✦✿✦•♥️•✦✿✦••┈┈• 3) Introduction ot electricity. •┈┈••✦✿✦•♥️•✦✿✦••┈...